Hurricane Heavy Industrial (HI) natural ventilator

For over 25 years, the Hurricane® range of Australian engineered vertical vane natural ventilation technology has been built to endure the toughest of climatic conditions and operating environments. Edmonds® ventilation products are designed, engineered and manufactured at its ISO9001 accredited facility in Seven Hills, Australia.

Hurricane was the first industrial ventilator to incorporate vertical vane design which tests at University of Technology Sydney have shown to be have an improved co-efficient of discharge (Cd) compared to similar sized traditional spherical vents.

Hurricane range of Special Variation ventilators such as Heavy Industrial (HI) ventilator that are designed for large spaces, such as factories, where the environment is considered potentially harmful to even coated steel. A protective polyolefin coating can be applied to HI when the environment are considered potentially harmful to aluminium. It is suitable for corrosive environments with fumes pH 4-7 inclusive. Application examples for HI ventilators are ceramic plants, power coating facilities and gritty environments.

Critical components such as bearing are protected by a custom design seal to reduce the chance of contamination and corrosion.

Features and benefits
Applications
Accessories
Colours and coating
Specification
Specification
Roof mounted ventilators shall be Hurricane® Heavy Industrial 900mm (model HI 900) vertical vane ventilators and shall be manufactured from standard aluminium, corrosion resistant marine grade aluminium or higher, stainless steel shaft, aluminium bracket, stainless steel rivets and fasteners. The main bearing holder assembly shall be Glass Filled Nylon (PA6-GF30) installed with an aluminium deflector and not be in the line of air flow. Ventilator tops shall be powder coated inside and outside with Colorsteel® / white polyolefin coating or as specified by the customer at time of confirmation. Ventilator tops shall be mill finished or powder coated with Colorsteel® or as specified by the customer at time of confirmation. The ventilator shall be weather-tight under proper installation and normal operating conditions, and capable of withstanding a wind speed of 205.2km/hr as tested by CSIRO. The ventilator shall be manufactured by CSR Edmonds® of New South Wales (1800 332 332) including applicable bases, dampers, fixings, trims, straps, flashings and other specified fittings manufactured by CSR Edmonds® as specified herein, or equivalent.
Warranty
Share
Contact us
General enquiries:
0800 277 123
Email:
Edmonds@csr.co.nz
Case studies

Browse our commercial & industrial case studies to see how Edmonds can help your project